Integra Plus EC
- Heat recovery unit for larger residential or commercial applications
- Up to 70% heat recovery
- Low power consumption
- Effective condensation control
- 3 speed control
- Summer mode
- EC motors
Select a product
Easy Installation
The Vent-Axia Integra Plus EC is designed for mounting in ceiling voids, lofts and above a suspended ceiling. Four 150mm spigots are provided for simple connection to insulated flexible or rigid ventilation ducting. The unit comes complete with a 22mm condensate outlet.
The Integra Plus EC incorporates two adjustable speeds and a Purge setting (full Speed).
Switching on the controller allows activation of the Summer Mode.
PERFORMANCE:
Performance: Maximum ventilation rate 486m3/hr, 135l/s
N° speed settings: 3 fully variable
DIMENSIONS:
Weight: 17Kg fan box
| A | ØB | C | D | E | F | G | H | I |
| 580 | 150 | 100 | 64 | 125 | 350 | 125 | 305 | 85 |
240VAC 50Hz.
European Patent No: 2298057
A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on ‘Auto’ setting and ITC controllers on sensor mode. Visionex PIR can be wired for either On/Off or Trickle/ Boost operation.
- Fits any UK single gang mounting box.
- Adjustable timer overrun (5-25 minutes).
- Range of detection up to 10 metres.
- Designed to meet IP43.
- Ambient operating temperature range 0°C to +50°C.
- Maximum load: 2.5 amps/600W inductive. Not suitable for use with lighting.
- Internal use only.
- No switched live required for internal rooms and WCs.
- Double insulated.
- Volt-free contacts.
- Supply voltage 220-240V/1/50Hz.
3D REVIT FILES:
Raadpleeg de tab Downloads voor technische informatie
ESTIMATED RUNNING COSTS
Calculate estimated running costs for this product using the tool below.
For average costs, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations.
Based on the inputted figures, estimated running costs would be:
Overview
Easy Installation
The Vent-Axia Integra Plus EC is designed for mounting in ceiling voids, lofts and above a suspended ceiling. Four 150mm spigots are provided for simple connection to insulated flexible or rigid ventilation ducting. The unit comes complete with a 22mm condensate outlet.
The Integra Plus EC incorporates two adjustable speeds and a Purge setting (full Speed).
Switching on the controller allows activation of the Summer Mode.
Technical
PERFORMANCE:
Performance: Maximum ventilation rate 486m3/hr, 135l/s
N° speed settings: 3 fully variable
DIMENSIONS:
Weight: 17Kg fan box
| A | ØB | C | D | E | F | G | H | I |
| 580 | 150 | 100 | 64 | 125 | 350 | 125 | 305 | 85 |
Models
Accessories
240VAC 50Hz.
European Patent No: 2298057
A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on ‘Auto’ setting and ITC controllers on sensor mode. Visionex PIR can be wired for either On/Off or Trickle/ Boost operation.
- Fits any UK single gang mounting box.
- Adjustable timer overrun (5-25 minutes).
- Range of detection up to 10 metres.
- Designed to meet IP43.
- Ambient operating temperature range 0°C to +50°C.
- Maximum load: 2.5 amps/600W inductive. Not suitable for use with lighting.
- Internal use only.
- No switched live required for internal rooms and WCs.
- Double insulated.
- Volt-free contacts.
- Supply voltage 220-240V/1/50Hz.
Downloads
3D REVIT FILES:
Related Products
Useful links
-
Trade Counter
Click here -
Brochures
Click here -
Legislation
Click here -
Contact Us
Click here -
About Us
Click here -
Downloads
Click here